DTF TRANSFER My Vet Bill Identifies As A Student Loan

YOU MUST USE A COMMERCIAL HEAT PRESS FOR ALL TRANSFERS SOLD IN THIS STORE.

A CRICUT EASY PRESS OR IRON WILL NOT WORK!

Heat your press to 310-325° F depending on your press.

We recommend starting with a lower temp and going to a higher temp if needed. Some presses run hot, some have cold spots. We recommend testing your press in multiple areas with a heat gun and practicing with extra transfers to find your "sweet spot."

Pre-press the shirt or material for a few seconds before adding the transfer to remove moisture.

Lay the transfer down flat with the ink facing the material.

Press with extremely heavy pressure for 20 seconds.

Peel the transfer film off of the shirt when it is completely COLD.

Cover the design with a Teflon sheet.

Press for 10 more seconds.

If the transfer does not stick, put the transfer paper back down, and press for a few more seconds. Transfers not sticking are usually due to uneven heating across the press, not enough pressure, and/or not pressed long enough.

If you need help with troubleshooting, please reach out via email at bkdesignsandblanks@gmail.com

DTF transfers can be pressed onto any shirt material including cotton and polyester.

BK Designs & Blanks, LLC is not responsible for operator or machine error when applying screen print, DTF, or sublimation transfers. We recommend purchasing extra of each transfer and practicing with your machinery, temperatures, pressure, and times before attempting your final product.

Please email bkdesignsandblanks@gmail.com with any questions or concerns.