DTF TRANSFER I don't have a resting b face

DTF

THIS IS NOT A SHIRT! Just the transfer. Must have heat press. An iron will NOT work.

You can use any mock up to run in your own group/page to gauge interest.

• I am NOT responsible for operator error, if you are concerned with the first ones you do, I recommend ordering a couple extra.
  
  

• We recommend heating your press to 310-325° F depending on your press. We recommend starting with a lower temp and going to a higher temp if needed. Press the shirt or material before adding the transfer to remove moisture. Lay the transfer down flat with the design facing the material. Press the transfer for 20 seconds. COLD PEEL. Cover the design with a Teflon sheet. Press for 10 more seconds.
  ~If the transfer is having trouble sticking we recommend pressing for 2-3 more seconds. if you need help with troubleshooting, please reach out via email at bkdesignsandblanks@gmail.com

These transfers can be applied to 100% cotton, 100% polyester and poly/cotton blends

~*~THESE TRANSFERS MUST BE PRESSED USING A HEAT PRESS. These will NOT work using an at home iron or any other type of hand held press.

The colors on transfers may vary slightly due to screen resolution and settings per device.