Custom SUBLIMATION Transfers - Upload Your Own Single Images**SAME DAY TAT BY 8AM EST TUE-FRI (TAT EXCLUDES DAILY DEALS)**

YOU MUST USE A COMMERCIAL HEAT PRESS FOR ALL TRANSFERS SOLD IN THIS STORE. A CRICUT EASY PRESS OR IRON WILL NOT WORK!

• Heat your press to 385-400 degrees depending on your press.
• We recommend starting with a lower temp and going to a higher temp if needed. Some presses run hot, some have cold spots. We recommend testing your press in multiple areas with a heat gun and practicing with extra transfers to find your "sweet spot."
• Pre-press the shirt or material for a few seconds before adding the transfer to remove moisture.
• Insert a piece of Teflon paper inside of the shirt/item to separate the layers to avoid ink bleed.
• Lay the transfer down flat with the ink facing the material. 
• Cover the transfer with a piece of Teflon paper to avoid ink bleed.
• Press with light to medium pressure for 50-60 seconds.
• If you need help with troubleshooting, please reach out via email at bkdesignsandblanks@gmail.com

Sublimation transfers must be pressed onto items with as much polyester content as possible. The higher the polyester content, the more vivid the image will press. We recommend using at least 50% polyester fabrics, and even fabrics as low as 50% will have a faded, vintage look.

BK Designs & Blanks, LLC is not responsible for operator or machine error when applying screen print, DTF, or sublimation transfers. We recommend purchasing extra of each transfer and practicing with your machinery, temperatures, pressure, and times before attempting your final product.

Please email bkdesignsandblanks@gmail.com with any questions or concerns.